Bears Set

Bears Set

Packaged Bearing Some Of The Points Should Be Noted That

Bearing In the manufacture of finished and approved, after passing inspection, cleaning and anti-rust treatment that is then placed inside Package In order to achieve waterproof, moisture, dust, shock, maintaining the quality and precision bearings, and easy to use and Sell Purposes. Bearings within the packaging can be divided into two kinds of packaging and packaging.

By corrosion of the bearing package is divided into three categories:

short rust on the packaging: rust on 3 ~ 6 months for high-volume shipments to the same subscribers, the short term will be put into use in the bearing. By mutual agreement, to facilitate the use of the principle, using simple packaging.

general corrosion on the packaging: rust of a year for general-purpose bearings.

long rust on the packaging: rust of two years for special and precision bearings.

Have polyethylene packaging materials bearing Plastic Tube (box), kraft paper, plain and wrinkles polyethylene paper, cartons, polyethylene or polyethylene plastic film, the preparation of nylon or plastic fastened with fastening tape, waterproof plastic with high strength, sacks, and so on. These materials are required to ensure the corrosion resistance of the material passed the test.

Packaging bearing the principle requirements: miniature bearings: 10 to 15 sets of bearings into a plastic tube, every 5 to 10 plastic tube put into a box (or bag, paper bag).

, the small bearing: Sets of polyethylene film bearing, external kraft paper for paper or polyethylene bag;

Sets of bearings into a plastic tube (box);

Single set of bearings with polyethylene film bags, folding or sealing the bag and then into a box.

large bearing: With polyethylene film or polyethylene single set of packing paper, then into a box;

Polyethylene film bag, one set of packaging folding pocket, then into a box;

Single set into special Plastic Box ;

Single set of three-wrapping packing: inner with polyethylene film or a composite tape, the middle fastening band with the outer layer of plastic with a waterproof penetration.

large bearings: Single set of three-wrapping packaging (ibid.);

By four single-wrapping packing: wrapping packaged in the above three, then the outermost layer of linen wrapping band.

Diameter 150mm on a detachable tapered roller bearings, in the packaging and external components should be preceded by polyethylene film liner, or inner and outer components packaged separately.

On the outer diameter 150mm of interchangeable cylindrical roller bearings, due to complete packaging easy to knock injury, general internal and external components can be used separately packaged.

Bearing the general packaging materials and requirements are as follows:

double corrugated box, carton weight (gross weight) does not exceed 25kg, external plastic box Strapping Binding;

nail plate box ( Wooden box ), Each box of the total weight of not more than 30kg, blue steel box tied external fat;

calcium blank corrugated boxes, each box the total weight of not more than 25kg, box strap tied with love.

Will be packed with bearings mounted within the box, it should first liner in the box Plastic bags Or plastic film; box if any gaps, needed corrugated blocks, scraps of paper and other dry material to fill.

About the Author

I am a professional writer from Frbiz Site, which contains a great deal of information about lavaliere microphone , ribbon mic, welcome to visit!

Russell 2000 Bear Set-Up